Soft start-up valve is used to input compressed air into pneumatic system slowly and has the effect of safety and protection. Air intake is connected with the input P of Soft start-up valve. If coil is energized, the 3/2 way valve opens. At this time, a little air comes to output A through throttle valve, which increases the pressure of the system gradually; when the output pressure is equal  the half of the input pressure, Soft start-upvalve completely opens and the flow at this time reaches the highest value of itself. When the coil is de-energized, air intake P closes, the air returns to R orifice through reflux valve and is quickly exhausted. The pressure of the system falls to zero, which protects the whole system.

Specification:

Installation & Usage:

Manually adjust the “+” and “-“throttle screw at the bottom of the soft start-up valve  as per the requirement of start  speed.  It shall go slowly, other wise sudden acting of the product or system  shall be caused with a heavy impact.

Ordering Code:

The post 17_Airtac GV Series appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

1.It is module design and can be used with G series F.R.L. combination by bracket.

2.This valve can be used as manual 3/2 way valve.

3.Visual indication marked EXH/SUP.

4.This valve meets the standard on installation conducted by operator specified by OSHA (Occupational Safety & Health Administration). When the machinery is maintained and serviced, the purge valve (Safe on-off valve) for remaining pressure shall be used to eliminate the remaining pressure when the air source is cut off. Valve must be locked to prevent accidental operation by a third party during maintenance. This prevents accidental system pressurization & cylinder actuation which can result in injuries to the machine operator.

Specification:

Installation & Usage:

1.Check whether the components have been damaged during transportation before installing and using.

2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.

3.Please notice whether installation condition accords with technical requirements (such as “working  pressure” and “applied temperature range”);

4.Avoid usage in an environment that exposes the filter and lubricator bowl through contact with Chlorine, solvent, aromatic essence, acid and alkali to avoid damage to the Filter and Lubricator bowl.

5.Regularly clean or change filter core. Lubricators and regulators shall be in descending order.

6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.

Ordering Code:

The post 18_Airtac GZ Series appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.