Specification:

Ordering Code:

The post Airtac GVF Series Vacuum filter appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

1.Panel support can be chosen for the installation of regulator with independent use in pipeline.

2.The structure is delicate and compact, which is convenient for installation and application.

3.The performance of pressure adjustment is reliable and steady.

4.In addition to  standard type, lower pressure type is optional (The highest adjustable pressure is 0.4 MPa).

Specification:

Installation & Usage:

1.Check whether the components have been damaged during transportation before installing and using.

2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.

3.Please notice whether installation condition accords with technical requirements (such as “working pressure” and “applied temperature range”).

4.The medium used or installation environment shall be noticed. The matters with chlorine, carbon compound, aromatic compound and oxidizing acid and alkali shall be avoided to prevent the damage of bowl and oil bowl.

5.Regularly clean or change filter core. Lubricators and regulators shall be in descending order.

6.Keep dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.

Ordering Code:

The post 28_Airtac SR Series appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

1. Back pressure structure, compact type, cost-effective, installation time saving.

2. Broad regulating range; low-pressure type is optional other than the standard type; stable output pressure; applicable to situation which has low expectation on output pressure but high expectation on performance and cost-effectiveness.

3. Single unit installation; easy to mount

Specification:

Installation & Usage:

Unlock the regulating knob before pressure adjustment, then lock it after the adjustment. Otherwise, may cause the regulating knob damage or the outlet pressure change.

1.Pull the regulating knob to unlock, when the orange marking ring below the regulating knob appears, indicating that the regulating knob is unlocked.

Push the regulating knob to lock, when the orange marking ring below the regulating knob disappears completely, indicating that the regulating knob is locked.

Ordering Code:

The post Airtac SDR Series appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

1.It has sensitive reaction and can work under low pressure.

2.The displayed words in the dial are clear and there are several pressure units to be ed.

3.There are several installation ways and installing accessories to be ed.

4.Various dimensions of screw thread are available.

Specification:

Ordering Code:

The post Airtac Pressure Gauge appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

1. Larger measurement range.

2. Single button to finish learning setting.

3. Normally close and normally open can be exchanged.

4. Easy to install.

Specification:

Installation & Usage:

2. Function operation：

2.1. Quick setting：Press the SET button for less then two seconds to finish quick setting.

2.2. Middle valve setting：Press the SET button for two to five seconds to finish setting valve A；

Press the SET button again to finish setting valve B.

＊Middle valve=(A+B)/2＊

2.3. N.O./N.C. switch：Press the SET button for six to ten secondsto finish N.O./N.C. switching.

 2.4. Lock/Unlock switch：Press the SET button for eleven to twenty secondsto finish Lock/Unlock switching.

 2.5. Factory-fresh state：Press the SET button for over twenty seconds to return factory-fresh state.

Ordering Code:

The post Airtac DPC Series minitype no display pressure switch appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

Installation & Usage:

1. Do not drop ? knock or apply excessive impact while handling. Otherwisecould cause damage and a malfunction.

2. The tensile strength of the cord is 60N. Applying a greater pulling force on it can cause a malfunction.

3. Do not exceed the screw-in torque of 7N.m when installing piping.Exceeding this value may cause malfunctioning of the sensor.

4. Do not use it with corrosive and/or flammable gases or liquids.

5.Please use it within rated pressure range.

6. Turn off the power before connecting the wires.

7. Don’t use in an environment with spattering liquid of oil or solvent.

8. Separate power lines from high voltage lines, avoiding wiring in the same conduit with these lines.

Ordering Code:

The post Airtac DPS Series digital display pressure switch appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

Installation & Usage:

Ordering Code:

The post Airtac DPH Series digital display pressure sensor appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.

Specification:

Installation & Usage:

Ordering Code:

The post Airtac GVR Series Vacuum regulator appeared first on Samux | AirTAC Distributer | ATTEN Distributer | Soldering Station | Dealer | Supplier | Air Tac | Airtacindia | Airtac India.